6
Installation
Ready to switch on
Plug the unit into the AC outlet.
On the front panel, the light above the POWER button
will be
red to indicate that the unit is in standby. (Standby means plugged-
in but not switched on.)
Switch the unit on by pressing the POWER button
. The red light will
change to green.
(To switch the unit back to standby, simply press
again.)
The unit is now ready to use.
Note–If necessary, peel off the label entitled 'IMPORTANT NOTES'
on the outside of the CD door.
Cleaning & Maintenance
This unit is maintenance free - do not use oil or other lubricants on any of
the moving parts.
You may clean the main unit and speakers' cabinets periodically using a slightly
dampened cloth.
To Next Page
Loading...
Need help?
General
