15
CD operation
Note–The program will be cleared if the CD door is opened.
(Alternatively, press one of the
CD buttons on the remote.)
Editing the program
Before editing, make sure no disc is playing.
To change a track, press PROG repeatedly (until the required P -
umber is displayed) then press or to change the TRACK number.
To delete a track, press PROG repeatedly (until the required P - number
is displayed) then press
or to change the TRACK number to - - .
To add a track, press PROG repeatedly (until TRACK 0 0 flashes) then use
CD / SELECT and
or to select required disc and TRACK number.
Clearing the program
To clear the program, stop any disc playing first, then press once play has
stopped.
If you don't want to clear the
program but wish to play one
of the loaded discs normally,
simply press one of the three
buttons below the players:
To Next Page
Loading...
Need help?
General
