12
OPERATING INSTRUCTIONS
TURNING THE SYSTEM ‘ON’
Plug the unit into the 120 AC outlet.
At the front of the unit, the light within the POWER/STANDBY button will be red
to indicate that the unit is in standby (standby means plugged-in but not switched
on).
Switch the unit on by pressing the POWER/STANDBY button on the front panel
or the remote. The main display and CD door lighting comes on.
The unit is now ready to use.
(To switch the unit back to standby, simply press button again.)
MS3103_ib012803.p65 28/1/2003, 11:3612
To Next Page
Loading...
Need help?
General
