8
AC Plug
POWER SOURCE
This system is designed to operate on 120V AC 60Hz power supply only. Connecting
this system to any other power source may cause damage to the system and such
damage is not covered by your warranty.
Make sure that you connect this system to an AC outlet that is always “live”. Do not
connect this system to an AC outlet that is controlled by a wall switch.
1.) Unwind the AC Power Cord completely.
2.) Insert the plug into any convenient 120V 60Hz AC outlet.
NOTE:This unit has a polarized AC plug with one wide blade and one narrow
blade. This plug will only fit into a matching polarized AC outlet. This is a safety
feature to reduce the possibility of electric shock. If this plug will not fit in your AC
outlet, you probably have an outdated non-polarized outlet. You should have your
outdated outlet changed by a qualified, licensed electrician. Do not file the wide
blade on the plug, or use an adapter to make the plug fit into your outlet. This
defeats the safety feature and could expose you to electric shock.
MS3103_ib012803.p65 28/1/2003, 11:368
To Next Page
Loading...
Need help?
General
