17
Presetting Stations In The Tuner Memory
You can preset up to 40 stations (20 AM and 20 FM) in the tuner memory for
immediate recall.
1.) Tune to the first station you wish
to memorize using the either the
Automatic or Manual Tuning
method described on page16.
Example: FM 103.5 MHz.
2.) When the desired station
frequency appears on the display
press the TIME-SET/MEMORY
button on the front panel or
remote control. The MEMORY
indicator and Preset Memory
(Channel) number “00” will flash in the display.
3.) While the MEMORY indicator is
flashing press the PRESET UP/
RANDOM button on the front
panel or remote control to
advance the Preset Memory
(Channel) number from “00” to
“01”. Then press the TIME-SET/
MEMORY button again to enter
the desired station in Preset
Memory (Channel) number 01.
The MEMORY indicator stops
flashing and the display appears.
4.) Tune to the next station to be memorized, press the TIME-SET/ MEMORY
button, press the PRESET UP/MEMORY button to select Preset (Channel)
number “02”, and press the TIME SET/MEMORY button again.
5.) Repeat Step 4, selecting a different Preset (Channel) number each time, until
you have entered up to 20 stations on one band, then press the TUNER/
BAND button to select the other band and follow the same procedure to preset
up to 20 stations on that band.
MS3103_ib012803.p65 28/1/2003, 11:3617
To Next Page
Loading...
Need help?
General
