29
8.) To activate the timer, press TIMER button (on the front panel) so that TIMER
Indicator appears at the right of the display.
9.) Press POWER/STANDBY button to switch off the unit to standby..
Timer operation is now set. The unit will switch itself on and off at the set times,
every day.
NOTE: If ever you find the whole time display flashing, the clock needs to be re-
set. This could be due to the unit having been disconnected from the AC outlet, or
a power interruption.
Cancelling Timer Operation
If you don’t want the unit to switch itself on, for example at weekends, press TIMER
button (on the front panel) so that the word TIMER is not displayed. (The timer
settings are still retained for the next time you wish to activate the timer.)
To activate timer operation again, repeat steps 8 and 9 above.
Sleep Timer
The unit has a sleep timer. Activating the sleep timer while you’re listening to a
radio station or CD will make the unit switch itself off after 90 minutes.
To activate the sleep timer, press SLEEP button (on the front panel) so that SLEEP
indicator appears towards the right of the display.
To cancel the sleep timer, press SLEEP button so that so that the word SLEEP is
not displayed.
MS3103_ib012803.p65 28/1/2003, 11:3629
To Next Page
Loading...
Need help?
General
