19
Recalling Preset Stations
1.) Press the TUNER/BAND button to select the Tuner function and the desired
band.
2.) Press the PRESET UP/RANDOM or PRESET DOWN/REPEAT buttons on
the front panel or the remote control to select the desired Preset (Channel)
number.
NOTE:
You may also select the Preset (Channel) numbers directly by pressing the
appropriate number buttons on the remote control.
• To select Preset (Channel) numbers 1 through 9, press the corresponding number
buttons.
• To select Preset (Channel) numbers 11 through 19, press the “+10” button first
and then appropriate number button.
• To select Preset (Channel) number 20, press the “+10” button twice, then press
the “0” button.
Changing Preset Stations
To change any preset station simply enter a new station in the Preset (Channel)
number that you wish to change. When the new station is entered in the memory
the previously memorized station will be erased.
TIME MODE/REMAIN Button
During Tuner operation the display will show the frequency of the radio station. To
see the time press the TIME MODE/REMAIN button once on the front panel or
remote control. The display will show the time for approximately 10 seconds and
then change back to radio frequency automatically.
MS3105_120503.p65 5/12/2003, 12:0319
To Next Page
Loading...
