Emerson MS3105 - Program Editing and Repeat; Program Repeat Functionality; Editing Programmed Tracks

27
Program Repeat Function
You can use the Program and Repeat functions together to continuously repeat
the programmed sequence. After programming the desired sequence press the
PRESET-DOWN/REPEAT button until the “
ALL DISC” indicator appears in
the display, then press the PLAY/PAUSE button to begin programmed repeat
playback.
To cancel programmed repeat function press the PRESET-DOWN/REPEAT button
until no “
” indicator appears in the display, or open the CD door.
Editing The Program
The player must be in the Stop mode to edit the program.
• To change a track, press TIME-SET/MEMORY button repeatedly until the
required “P –” number is displayed.
Next, press or button to change the track number, then press TIME-
SET/MEMORY button to store the change.
• To delete a track, press TIME-SET/MEMORY button repeatedly until the
required “P –” number is displayed.
Next, press or button to change the track number to “00”, then press
TIME-SET/MEMORY button to store the change.
• To add a track, press TIME-SET/MEMORY button repeatedly until track number
“00” is displayed.
Next, use CD/DISC SKIP button and or buttons to select required disc
and track number, then press TIME-SET/MEMORY button to store the change.
MS3105_120503.p65 5/12/2003, 12:0327