12
BATTERY INSTALLATION
Insert 2 ‘AAA’ size alkaline batteries, not included, into the battery compartment
of the remote handset, observing the battery polarity and replace the cover.
BATTERY REPLACEMENT
When the batteries become too weak, the operating distance of the remote handset
is greatly reduced and you will need to replace the batteries.
NOTES:
• To maintain the accuracy and long life of the transmitter, do not press two or
more buttons simultaneously.
• If the remote control is not to be used for a long time, remove the batteries to
prevent possible damage through leaking batteries.
• Do not mix different types of batteries, or old batteries with new ones.
USING THE REMOTE CONTROLLER CORRECTLY
• Point the remote handset at the Remote Sensor on the front panel.
• The functions of the buttons on the remote handset are the same as the
corresponding controls on the main unit.
• When there is a strong ambient light source, the performance of the infrared
Remote Sensor may be degraded, causing unreliable operation.
• The maximum effective distance for remote control operation is about 16 feet
(Approx. 5m)
MS9600_ib_0313.p65 25/3/2002, 15:2312
To Next Page
Loading...
Need help?
General
