6
AC Plug
CONNECTING THE AC POWER CORD
IMPORTANT !!
BEFORE CONNECTING THE AC POWER CORD MAKE SURE THAT YOU HAVE
REMOVED THE CD TRANSIT SCREW FROM THE BACK PANEL OF THE MAIN
UNIT. REFER TO THE INSTRUCTIONS ON PAGE 4.
After connecting the speakers unwind the AC power cord fully and connect it to
any convenient household AC outlet. This system is designed to operate on 120V
60Hz AC power only. Connecting this system to any other power supply may cause
damage to the unit which is not covered by your warranty.
This unit has a polarized AC plug with one wide blade and one narrow blade.This
plug will only fit into a matching polarized AC outlet. This is a safety feature to
reduce the possibility of electric shock. If this plug will not fit in your AC outlet, you
probably have an outdated non-polarized outlet. You should have your outdated
outlet changed by a qualified, licensed electrician. Do not file the wide blade on the
plug, or use an adapter to make the plug fit into your outlet. This defeats the safety
feature and could expose you to electric shock.
MS9600_ib_0313.p65 25/3/2002, 15:236
To Next Page
Loading...
Need help?
General
