24
5.) When the desired Disc number and Track number appear on the display press
the PROGRAM button to enter the info in memory.
The track number returns to “00” and the
program number advances to “P – 02”
indicating that you can select the second
disc number and track number to be
memorized.
6.) Repeat Steps 3, 4, and 5 to enter up to 32 tracks in the Program Memory.
7.) Press the PLAY/PAUSE button to begin programmed playback. The
MEMORY indicator remains ‘On’ and
playback will begin on the first track that
you programmed. The display will show
the disc number and track number of the
track being played.
Note: If you press the Track Skip /
buttons during programmed playback the
player will skip to the next track in the programmed sequence, not the next
track on the disc being played.
After each programmed track has been played the player stops but the MEMORY
indicator remains ‘On’ and the program remains in the memory. If you press the
PLAY/PAUSE button while the MEMORY indicator remains ‘On’ the
programmed sequence will be played again. To cancel the program after the player
has stopped press the STOP button again. The MEMORY indicator goes ‘Off’.
To cancel the program while the player is playing, press the STOP button twice.
The MEMORY indicator goes ‘Off’.
MEMORY
CD
TRACK
MEMORY
CD
TRACK
MS9600_ib_0313.p65 25/3/2002, 15:2324
To Next Page
Loading...
Need help?
General
