29
SLEEP TIMER OPERATION (On Remote Control Only)
The Sleep Timer function allows you to operate the system for up to 90 minutes
and then shuts the power off automatically.
1.) Press one of the Function buttons (TUNER/CD/TAPE) to turn the system ‘On’
to the desired function.
2.) Press the SLEEP button on the remote control handset. The display will show
“SLEEP” and “90” for a few seconds. Then the display returns to the normal
function display but the SLEEP indicator remain ‘On’. The system will play for
90 minutes and then shut off automatically.
3.) To adjust the amount of Sleep Timer operation, continue pressing the SLEEP
button. With each successive press the display shows “90”, “60”, “45”, “30” or
“15” minutes of operation. (After “15” minutes the next press is Sleep Timer
“Off”.)
4.) To shut the system ‘Off’ before the Sleep Timer ends, press the POWER button
at any time.
MS9600_ib_0313.p65 25/3/2002, 15:2329
To Next Page
Loading...
Need help?
General
