6. Eco Button: When the unit is in ECO mode, the
light will turn on. In ECO mode, the unit will
turn off once the room is cooled to the set
temperature. The fan will also be off at this point.
The unit will turn back on when the room
temperature rises above the set temperature.
Before the compressor stars, the fan will
run 10 minutes – stop 20 seconds - and
again, to save energy.
7. Sleep Button: Press the SLEEP button, the Sleep
Light will be on after 10 seconds, and all the lights will
be off. In SLEEP mode, the air-conditioner will
automatically adjust the temperature and fan
speed to make the room more comfortable during
the night.
8. Fan Speed Button: Press the FAN SPEED button
to choose the fan speed options. You can choose
Hi, Med, Lo or auto speed in COOL mode and
choose Hi, Med, Low in FAN mode.
9. Filter Button: When the Filter Check light comes
on, it can be turned off by pressing the Filter Check
button. After the compressor has been working for 500
hours, the Filter Check light will turn on to remind the
user to clean the filter.
To Next Page
Loading...
