ROC364 Instruction Manual
B-2 Local Display Panel Rev Jun/05
B.2 Installation
A kit is available for field installations of the Local Display Panel (LDP) in a ROC enclosure that contains
cutouts for the LDP in the door. The Local Display Panel kits come in three colors:
♦ White – Part Number FSACC-1/LCWH.
♦ ANSI 61 Gray – Part Number FSACC-1/LCDAH.
♦ Regal Gray – Part Number FSACC-1/LCDRH.
The kits include the items in the following list:
Description Quantity
LCD Sub-Assembly 1
Window 1
Gasket 1
Display Cover Assembly 1
6-32 × .25 Screws
2
6-32 Hex Nuts 3
Flat Wire Clips 2
RTV Sealant 1
Cable Assembly 1
Refer to Figure B-2 for how these parts fit together. Note that the panel is also referred to as the LCD.
SCREW
DISPLAY
COVER ASSEMBLY
PRE-PUNCHED DOOR
(NOT INCLUDED)
CABLE
ASSEMBLY
GASKET
WINDOW
HEX
NUT
LCD
SUB-ASSEMBLY
Figure B-2. LDP Parts Orientation
To Next Page
Loading...
