5.2 Verifying configuration with LOI
The optional LOI can be used for commissioning the device. The LOI is a two-
button design with internal and external buttons. The internal buttons are
located on the display of the transmitter, while the external buttons are
located underneath the top metal tag. To activate the LOI, push any button.
LOI button functionality is shown on the bottom corners of the display. See
Table 5-3 and Figure 5-4 for button operation and menu information.
Figure 5-3: Internal and External LOI Buttons
A. Internal buttons
B. External buttons
Note
See Figure 12 on page 15 to confirm external button functionality.
Table 5-3: LOI Button Operation
Button
Left No SCROLL
Right Yes ENTER
Quick Start Guide March 2022
18 Emerson.com/Rosemount
To Next Page
Loading...
