4 Upgrade procedure
Procedure
1. Power off the device at the power source.
2. Disconnect all cabling.
3. If necessary, move the device head to a safe, non-hazardous area.
WARNING
Bring the transmitter head to a suitable location for maintenance work and
continue with the exchange and make sure to follow proper protection procedures
in order to avoid damage from Electrostatic Discharge (ESD).
4. Remove the cover from the transmitter.
5. Unsnap the display cover by pressing two plastic clips upwards.
Manual Supplement Upgrade procedure
00809-0200-2410 January 2022
Rosemount 2410 Tank Hub 11
To Next Page
Loading...
