11
Manual Supplement
00809-0400-2410, Rev AA
Rosemount 2410 Tank Hub
March 2016
Rosemount 2410 Tank Hub
When replacing an Enraf gauge with a Rosemount device, the Rosemount device
must have the same Enraf address as the replaced one.
2. Set Emulation address for the Rosemount devices (possible Enraf addresses are
0-99)
(1)
.
Tip!
In the Tank Database tab, set the Modbus address to the same as the chosen Enraf
address for each device.
1. Emulation address is by default set to “65535” for tank positions that are not in use.
To Next Page
Loading...
