Emerson Rosemount 2410 - Page 15

15
Manual Supplement
00809-0400-2410, Rev AA
Rosemount 2410 Tank Hub
March 2016
Rosemount 2410 Tank Hub
4. Select the Communication tab.
5. Set the communication parameters:
6. Select the Enable Channel check box to activate the protocol channel.
7. Select OK to store the current configuration and close the configuration window.
Port The COM port the EBM will connect to
Baud rate 1200
Stop bits 1
Parity None
Modem RS-232
Handshaking None
Reply timeout 1000 ms
Retries 3
Description Text describing the configured channel