17
Manual Supplement
00809-0400-2410, Rev AA
Rosemount 2410 Tank Hub
March 2016
Rosemount 2410 Tank Hub
6. Make sure TankMaster communicates directly with the tank hub and that the
proper communication channel is chosen.
7. Default Modbus Address is 247 for the tank hub. It is recommended to change it to
an address 101-199. Do the following:
a. In the 2410 Tank Hub Communication window select Change Address on Device...
to open the Change Address window.
b. Enter the Unit ID and select the new Modbus Address.
When changing the device address, the Unit Id is used as a unique identifier of the
device. The Unit Id can be found on a label mounted on the device.
c. Select OK to confirm the address settings and close the Change Address window.
To Next Page
Loading...
