18
Manual Supplement
00809-0400-2410, Rev AA
Rosemount 2410 Tank Hub
March 2016
Rosemount 2410 Tank Hub
d. The tank hub will not immediately switch from Enraf to Modbus protocol.
See “Automatic protocol switch mechanism” on page 28 for more information.
Select OK to retry. It takes a number of attempts.
Tip!
To make the tank hub switch faster from Enraf to Modbus, you can make
TankMaster search for devices on the communication protocol channels.
e. In the 2410 Tank Hub Communication window select Verify Communication to
check that communication is established between the TankMaster work station
and the tank hub. The Unit ID will appear when TankMaster finds the tank hub.
8. In the 2410 Tank Hub Communication window select Next to continue the
installation procedure of the tank hub.
9. Continue configuration as usual for a tank hub installation.
Right click and select
Find Devices.
Type the desired values in
the First and Last address
input fields in order to
restrict the search to a
certain range of addresses
(maximum range is 1-255).
Select Start.
The TRL2 field bus is
scanned for devices within
the specified address
range.
To Next Page
Loading...
