19
Manual Supplement
00809-0400-2410, Rev AA
Rosemount 2410 Tank Hub
March 2016
Rosemount 2410 Tank Hub
1.4.3 Configure specific variables for Enraf
1. In the Configuration tab, select Enraf Emulation.
When replacing an Enraf gauge with a Rosemount device, the Rosemount device
must have the same Enraf address as the replaced one.
2. Set Emulation address for the Rosemount devices (possible Enraf addresses are
0-99)
(1)
.
1. Emulation address is by default set to “65535” for tank positions that are not in use.
To Next Page
Loading...
