Emerson Rosemount 3300 Series - Page 95

Reference Manual
00809-0100-4811, Rev CA
February 2006
6-15
Rosemount 3300 Series
Using the 375 Field Communicator
To adjust amplitude threshold value:
1. Select HART command [1, 4, 5, 3].
The different amplitude thresholds appear on the display.
2. Open the desired amplitude threshold for editing.
3. Type the desired threshold value and click the ENTER button.
4. Click the SAVE button to store the new value in the transmitter database.
375_DISPLAY_THRESHOLDS.EPS
Signal amplitude
Amplitude threshold
375_DISPLAY_SET_THRESHOLDS.EPS