6.3 FOUNDATION
™
Fieldbus parameters
Table 6-1: FOUNDATION Fieldbus Parameters
Function Parameter
Probe type TRANSDUCER_1100 > PROBE_TYPE
Probe length TRANSDUCER_1100 > PROBE_LENGTH
Hold off distance/Upper null zone TRANSDUCER_1100 >
GEOM_HOLD_OFF_DIST
Tank height TRANSDUCER_1100 >
GEOM_TANK_HEIGHT
Mounting type TRANSDUCER_1100 > MOUNTING_TYPE
Pipe/chamber/nozzle inner diameter TRANSDUCER_1100 > PIPE_DIAMETER
Nozzle height TRANSDUCER_1100 > NOZZLE_HEIGHT
Measurement mode TRANSDUCER_1100 > MEAS_MODE
Product dielectric range
(1)
TRANSDUCER 1100 >
PRODUCT_DIELEC_RANGE
Upper product dielectric constant
(2)
TRANSDUCER 1100 >
UPPER_PRODUCT_DC
Process condition (rapid level changes) TRANSDUCER_1100 >
ENV_ENVIRONMENT
Volume calculation method TRANSDUCER 1300 >
VOL_VOLUME_CALC_METHOD
Tank diameter (only for ideal tank shapes) TRANSDUCER 1300 >
VOL_IDEAL_DIAMETER
Tank length/height (only for ideal tank
shapes)
TRANSDUCER_1300 >
VOL_IDEAL_LENGTH
Volume offset TRANSDUCER_1300 >
VOL_VOLUME_OFFSET
(1) Applicable to “Liquid Product Level” and “Solid Product Level” measurement
modes.
(2) Applicable to “Interface Level with submerged” and “Product Level and Interface
Level” measurement modes.
Quick Start Guide February 2019
24 Rosemount 5300 Level Transmitter
To Next Page
Loading...
