Quick Start Guide
11
March 2016
4.0 Sensor installation
4.1 Gaskets
The sensor requires a gasket at each process connection. The gasket material must be
compatible with the process fluid and operating conditions. Gaskets are required on
each side of a grounding ring (see Figure 10). All other applications (including
sensors or a grounding electrode) require only one gasket on each process
connection.
Figure 10. Flanged Gasket Placement
A. Grounding ring and gasket (optional)
B. Customer-supplied gasket
NOTICE
Metallic or spiral-wound gaskets should not be used as they will damage the liner face of the sensor.
To Next Page
Loading...
