Emerson Process Management GmbH & Co. OHG S-1
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
S
Safety Instructions
The instruction manual contains information about the component assembly, function,
installation, operation and maintenance of the X-STREAM
®
Enhanced series gas analyzers.
The manual covers several X-STREAM analyzer models and so may contain information
about congurations and/or options not applicable to your analyzer.
The installation and operation of units for use in explosive (hazardous) environments is
not covered in this manual.
Analyzers intended to be used in such environments are supplied with further instruction
manuals, which should be consulted in addition to this.
INTRODUCTION
The following denitions apply to the terms WARNING, CAUTION and NOTE, and the sym-
bol , as used in this manual.
DEFINITIONS
NOTE!
Indicates an imperative operational procedure, an important condition or instruction.
Indicates an operational or maintenance procedure, a process, a condition,
an instruction, etc.
Failure to comply may result in injury, death or permanent health risk.
Indicates an operational or maintenance procedure, a process, a condition,
an instruction, etc.
Failure to comply may result in damage to or destruction of the instrument,
or impaired performance.
The symbol
, together with a page number ( 6-5 ) or chapter headline ( Startup )
refers to more information, provided on the indicated page or chapter.
To Next Page
Loading...
Need help?
General
