Emerson RSTi-OM - Hardware Installation; IOLM Hardware Installation

7 IO-LINK Master W/ PROFINET and Modbus Quick Start Guide GFK-3213A
Power Connectors
The IOLM provides M12 (5-poles) L-coded input and output power
connectors. Use a 24VDC power supply capable of the total output current
required.
Note: Power connectors must have an approved cable or protective cover
attached to the port guarantee to IP67 compliance. For additional
information on available connectors and protective covers, please consult
the Emerson datasheet 00813-0100-0149.
Pin
Power
Input
(Male)
Power Output or
Actuator Power
(Female)
Description
1
V
S
+
V
S
+ or +V
IO-Link Master’s system
electronics and IO-Link
devices
2
V
A
-
V
A
- or 0V
Actuator supply
3
V
S
-
V
S
- or 0V
IO-Link Master’s system
electronics and IO-Link
devices
4
V
A
+
V
A
+ or +V
Actuator supply
5
FE
Note: The IOLM requires a UL-listed power supply with an output rating of
24 VDC.