22 IO-LINK Master W/ PROFINET and Modbus Quick Start Guide GFK-3213A
Configuring IO-Link Ports
The IO-Link Master gateway has two categories of IO modules: IO-Link Port
Modules and Port Status Modules. IO modules are used to configure IO-Link
ports and exchange PDI and PDO data with various IO-Link devices and
digital I/O devices.
IO-Link Port Modules are used to configure the mode of an IO-Link port.
Port Status Modules is a 4-byte input-only module that provides status
information of all IO-Link ports.
To access the modules to be configured under the IO-Link master, right-
click on the IOLM module in the Hardware configuration and select
Change Module List.
For more information on the Configuration of IO-Link Ports, please consult
Section Configuring Link Ports of the RSTi-OM User Manual (GFK-3212).
PROFINET IO Configuration
For detailed instructions, PROFINET IO Reference Information of the RSTi-
OM User Manual (GFK-3212).
To Next Page
Loading...
