Emerson Sensi 1F87U-42WF - Gather Installation Tools and Materials; Power Off and Remove Old Thermostat

66
Do I need a RC/RH jumper?
• Sensi Wi-Fi Thermostat has a built
in RC/RH jumper, no need to field
install a jumper
• If you have separate wires to RC
and RH terminals (two transformer
systems)
– Label the wires RC and RH
separately and then clip the
jumper wire on the back of the
Sensi face plate.
• Sensi Wi-Fi Thermostat has a
jumper built in on the back of the
thermostat
No jumpers required RC/RH jumper location
No jumpers are required when installing the Sensi Wi-Fi Thermostat