Need help?Do you have a question about the Emerson Sensi UP500W and is the answer not in the manual?
General| Type | Smart Thermostat |
|---|---|
| Wi-Fi Connectivity | Yes |
| Operating Modes | Heat, Cool, Auto, Off |
| Works With | Amazon Alexa, Google Assistant, Apple HomeKit |
| Installation | DIY or Professional |
| Warranty | 3-year limited warranty |
| Compatibility | HVAC systems including gas, oil, electric |
| Control Method | App |
| Display | Touchscreen |
| Power Source | Battery and C-wire compatible |
| Temperature Range | 45°F to 99°F (7°C to 37°C) |
| Stages | Up to 2 heat |
| Features | Geofencing |
| Remote Control | Yes, via app |
Covers Wi-Fi status, time, battery, room temp, set temp, and lockout icons.
Details on Mode, Fan, Schedule, Menu, Up, and Down arrow buttons.
Illuminates the thermostat display for 10 seconds.
Press the 'Mode' button to cycle through system modes like Heat, Cool, or Off.
Control the fan operation (Auto for thermostat control, On for continuous blower).
Covers holding one temperature and temporary holds for comfort.
Steps to disable Wi-Fi connectivity from the thermostat menu.
Manual procedure to set the thermostat's time without Wi-Fi synchronization.
Steps to configure a basic 7-day schedule with 4 set points.
Configure Wi-Fi network connection and manage radio status.
Settings for Outdoor (AC/Heat Pump) and Indoor (Gas/Electric) equipment.
Set the default reversing valve state for heat pumps.
Defines common wiring terminals like RH, RC, C, G, Y, W, O/B, L.
Discusses the correspondence between wire colors and terminal letters.
Explains Sensi Security Code, MAC ID, and Date Code for identification.
Details the battery compartment and RC/RH jumper wire.
To Next Page