Emerson Sensi Thermostat - Sensi Touch Smart Thermostat Reconnection; Reconnect Sensi Touch with iOS Device; Reconnect Sensi Touch with Android Device

7. You will see the Sensi network. Tap Sensi-XXXXXX and “join” that network. The Sensi network
password is the Security Code that came on a black card in the packaging.
If you don’t have the card anymore, the Security Code is also found on the back of the
thermostat face plate.
8. Once you have the blue check mark next to the Sensi network, return to the Sensi app. You can
now move to the next screen.
9. Select your home Wi-Fi network.
10. Enter the password for your Wi-Fi network.
After completing these steps, you should be reconnected, and can now access your thermostat.
To reconnect using an Android device, follow these steps:
1. Open the Sensi app.
2. Tap the + sign.
3. Choose the option, “Yes, it is on the wall.”
4. Press “Menu” and then “Connect” on the thermostat. The Wi-Fi icon is now flashing.
5. The app will prompt you to select your the Sensi network (Sensi-XXXXXX).
If it doesn’t show up, tap “scan again.” Make sure the Wi-Fi icon is flashing on the
thermostat.
6. Tap Next, and it will prompt you for the Security Code/PIN. The Sensi network password is the
Security Code that came on a black card in the packaging.
If you don’t have the card anymore, the Security Code is also found on the back of the
thermostat face plate.
7. Tap Next, and select your home Wi-Fi network.
8. Enter the password for your Wi-Fi network.
After completing these steps, you should be reconnected, and can now access your thermostat.
Sensi Touch Smart Thermostat
If you replaced your router, changed to a new Wi-Fi network, or updated your current Wi-Fi network’s
password, you’ll need to reconnect your Sensi thermostat to Wi-Fi.
To reconnect using an iOS device running iOS 10 or later, follow these steps:
1. Make sure your device is connected to the same 2.4GHz Wi-Fi network that you want to connect
to Sensi.
2. On the thermostat, tap Menu.
3. Tap Wi-Fi.
4. Tap “Set up a new network” or tap the house icon.
5. On your iOS device, open the phone Settings.
6. Tap Wi-Fi.
7. Scroll down to “Set up a new device…” and press Sensi-XXXXX.
8. In “Accessory Setup” press “Next.”
9. After it has joined, press “Done.”
To reconnect using an Android device, follow these steps:
1. Open the Sensi app.
2. Tap the + sign.
3. Choose your model and the option, “Yes, it is on the wall.”
4. On the thermostat, tap Menu.