SI-Ethernet User Guide 185
Issue: 1
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started Parameters
Key features
and Protocols
PC Applications Security Diagnostics
Glossary of
terms
Index
118 INIT Param Chann Parameter channel Initialization error
119 Link Overload Too many links to be handled in the same cycle
120 Mcast Over Limit Too many multicast addresses being used
200 Software Fault Software Fault
201 BG Overrun Background task overrun
202 Firmware Invalid Invalid firmware for hardware version
203 Drive Unknown Unknown drive type
204 DriveUnsupported Unsupported drive type
205 Mode Unknown Unknown drive mode
206 Mode Unsupported Unsupported drive mode
207 FLASH Error Corrupted Non-volatile FLASH
208 Database Init Database initialization error
209 File System Init File system initialization error
210 Mem Allocation Memory allocation error
211 Filesystem Error File system error
212 Config Save Configuration file save error
213 Over Temperature Overheated
214 Drive Timeout The drive has not responded within watchdog period
215 eCMP Comms Error eCMP communication failure
216 TO eCMP Slot1 eCMP communication to slot 1 timeout
217 TO eCMP Slot2 eCMP communication to slot 2 timeout
218 TO eCMP Slot3 eCMP communication to slot 3 timeout
219 TO eCMP Slot4 eCMP communication to slot 4 timeout
220 I/O Overload Digital output current demand too high
221 Factory Settings Missing factory settings
222 Functional Test Functional test failure
223 Config Restore Configuration file restore error
224 Self Test Error Power on self test error
225 Runtime Config Runtime configuration error
226 Processor except Processor exception
227 Task Starvation System task starvation
Value
Pr 0.10.070
Sub trip string Description
To Next Page
Loading...
