SI-Ethernet User Guide 39
Issue: 1
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started Parameters
Key features
and Protocols
PC Applications Security Diagnostics
Glossary of
terms
Index
6.1.1 Menu 0 - Ethernet setup
The Module ID:
• Onboard Ethernet = 430
• SI-Ethernet option module = 433
Module firmware version in ww.xx.yy.zz format.
The hardware version of the option module is in the format of xx.yy.
The module serial number is available as a pair of 32-bit values where Serial Number
LS (S.00.004) provides the least significant 8 decimal digits, and Serial Number MS
(S.00.005) provides the most significant 8 decimal digits. The reconstructed serial
number is ((S.00.005 x 100000000) + S.00.004). For example serial number
"0001234567898765" would be stored as S.00.005 = 12345 and S.00.004 = 67898765.
S.00.001 Module ID
Minimum 0 Maximum 65535
Default Units
Type 16 Bit Volatile Update Rate Power-up write
Display Format None Decimal Places 0
Coding RO, ND, NC, PT, BU
S.00.002 Software version
Minimum
0
(Display 00.00.00.00)
Maximum
99999999
(Display 99.99.99.99)
Default Units
Type 32 Bit Volatile Update Rate
Display Format Version Number Decimal Places 0
Coding RO, ND, NC, PT
S.00.003 Hardware version
Minimum 00.00 Maximum 99.99
Default Units
Type 16 Bit Volatile Update Rate
Display Format None Decimal Places 2
Coding RO, ND, NC, PT
S.00.004 Serial Number LS
Minimum 0 Maximum 99999999
Default Units
Type 32 Bit Volatile Update Rate Power-up write
Display Format Lead Zero Pad Decimal Places 0
Coding RO, ND, NC, PT
To Next Page
Loading...
