To Next PageTo Next Page
Need help?Do you have a question about the Emerson Unidrive M400 and is the answer not in the manual?
General| Model | Unidrive M400 |
|---|---|
| Type | AC Drive |
| Series | Unidrive M |
| Power Rating | Varies by model |
| Cooling | Fan Cooled |
| Overload | 150% for 60 seconds |
| Storage Temperature | -40°C to +70°C |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Product Type | Variable Frequency Drive |
| Control Method | V/f, Vector Control |
| Control Modes | Open Loop |
| Communication Protocols | Modbus RTU, CANopen, Ethernet/IP, Profibus |
| Communication Ports | Ethernet, RS-485 |
| I/O | Digital Inputs, Digital Outputs, Analog Inputs, Analog Outputs, Relay Outputs |
| Enclosure Rating | IP20 |
| Switching Frequency | 2 kHz to 16 kHz |
| Safety | STO (Safe Torque Off) |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit, Ground Fault |
| Operating Temperature | -10°C to +50°C |
| Humidity | 0 to 95% non-condensing |
| Output Voltage | 0-Input Voltage |
