Confi guration for your
Heating or A/C system
Set by installer to match your system. Record the setting.
Electric or Gas fan
operation
Set by installer to match your system. Record the setting.
EMR
Energy Management Recovery (EMR) [will not appear if thermostat is set
for Non-Programmable] Default setting is On. EMR starts your system
early so the temperature in your home is at the desired temperature at the
beginning of a program period.
Heat Cycle Rate Setting
(if system is MS or SS)
Default setting is ME (medium), if you desire a longer heating cycle set to
SL (Slow) or shorter cycle set to FA (Fast).
Heat Pump Cycle Rate
Setting (if system is Heat
Pump)
Default setting is ME (medium), if you desire a longer heat pump cycle set
to SL (Slow) or shorter cycle set to FA (Fast).
A/C Cycle Rate Setting or
Aux Heat Cycle Rate
Default setting is ME (medium) if you desire a longer cooling cycle set to
SL (Slow) or shorter cycle set to FA (Fast).
CONFIGURATION MENU DESCRIPTIONS
6
1
3
2
4
5
SETTING UP YOUR THERMOSTAT OPTIONS
20 • Blue Easy Reader Thermostat Homeowner’s Guide
To Next Page
Loading...
