Document Part # 026-4280 Rev 1 Page 6 of 33
©2022 Emerson Digital Cold Chain, Inc. This document may be photocopied for personal use.
Visit our website at www.climate.emerson.com for the latest technical documentation and updates.
6 User Interface
6.1. Icons
6.2. Keyboard Commands
Single commands:
• LIGHT relay: Press the light button
• AUX relay: Press the down arrow button
• Manual defrost: Press the defrost button for three (3) seconds
• ON/OFF: Press the ON/OFF button for three (3) seconds (if the function is enabled)
• Energy Saving: Press the ON/OFF button for three (3) seconds (if the function is enabled)
Figure 6-1 - XM670K Display
Cooling Output
Light Fan
The output is activated when the icon is ON. A delay
is present when the icon is blinking.
MEASUREMENT UNIT
°C, Bar, and (time) are ON depending on the
selection.
Defrost Auxiliary relay
Energy Saving Multimaster enabled
Generic alarm Clock/time
DURING PROGRAMMING: The measurement units of temperature and pressure will blink.
Table 6-1- XM670K Display Icons
To Next Page
Loading...
