30 • XM679K I&O Manual 026-1218 Rev 4
17.3.XM679 - 230VAC Valves/Wiring Diagram
Models at 115V
Supply: Terminals 7-8
Valve at 115V: Terminals 4-5
17.4.XM679 - 24VAC Valves/Wiring Diagram
Figure 17-2 - XM679 - 230VAC Valves
Figure 17-3 - XM679 - 24VAC Valves
NOTE: The jumper labeled as JMP is located inside the case of the controller. The JMP jumper should be
closed only when driving the 24VAC valve.
To Next Page
Loading...
