Bottom Panel
LABEL DESCRIPTION
RESET If the signal indicator is orange please wait for the indicator
to turn green. Press the reset button for 5-7 seconds to
restore the device to default factory settings wait approx. 1
minute for the device to reboot (Signal indicator flashes
green).
Ethernet port Connect to computers / Ethernet devices
2.0 Where to place the EM4591 repeater?
The best location to place the EM4591 is approximately half-way between your
wireless router and your wireless computer(s) which has/have the weakest wireless
reception. This way, the signal strength will be as good as possible. Refer to the
following images for an example:
To Next Page
Loading...
