11 |
NEDERLANDS
1. Go to ‘USB’ and press the ‘OK’ button.
2. Select ‘Multimedia’ and press the ‘OK’ button.
3. Select ‘PVR’ and press the ‘OK‘ button. The USB device will be accessed
automatically.
4. Select the folder ‘PVRRECORD’ and press the ‘OK’ button.
5. Select the recording you want to watch and press the ‘OK’ button. The recorder
program will automatically start.
6. Press the red button on the remote control to view the program full screen.
Hint: Use the yellow button to remove a recording from the USB device
8.4 Use the Time Seek (Goto) function
Once a recording is being played, you can use the ‘Time Seek’ button on the remote
control to navigate to a specific timeframe within the recording. This is perfect if you
want to rewind of move forward to a specific point in the recording.
1. Press the ‘Time Seek’ button on the remote control.
2. You will see a ‘GoTo’ popup. You can fill in the desired timeframe in the
recording using the arrow keys of the remote control and press the ‘OK’ button.
3. The recording will start the playback on the timeframe you have chosen.
9.0 Playing Media from USB devices
If you have connected a USB hard disk or USB memory stick, you can playback the
available media from the connected USB devices, since the EM7095 DVB-T host can
also be used as a media player. The EM7095 can play many sorts of video files. Video
files like .MOV, .MKV, .AVI and VIDEO_TS files are supported.
We will explain how to view or play the different media types.
9.1.1 DVD playback
The EM7095 is able to playback DVD files. DVD files made by yourself, can be played
without any problems.
The EM7095 does not play commercial DVD’s equipped with a CSS security.
However, DVD’s without security can be played.
9.1.2 DVD Video_Ts
1. Go to the ‘USB’ icon.
2. Use the arrow keys to select ‘Multimedia’ en press the ‘OK’ button.
3. Select ‘Movie’ and press the ‘OK’ button.
4. Select the folder where the DVD files are located and press the ‘OK’ button.
To Next Page
Loading...
