13 |
NEDERLANDS
4. Select the folder where the images are located and press the ‘OK’ button.
5. Select the image you want to play and press the ‘OK’ button.
6. The image will be shown according to settings as you have setup in the chapter
‘Photo Setup’.
Hint: If you want to see a slideshow with background music, then select an audio track
as described in chapter ‘Playing music and other audio’.
10.0 Other functions
Besides the already mentioned functions, there are some functions which are not
mentioned yet. Some of these functions are explained in the following chapter.
Time: Select the ‘Time’ icon to setup the time and time zone. You can also setup a
timer which switches the device off.
System: Select the ‘System’ icon and set a parental control (Age indication). You can
also set a password and restore the device to factory settings.
USB: Select the ‘USB’ icon. You can update the device using the ‘Software update’
option. A USB disk with firmware software is needed.
11.0 Frequently asked questions
Q: I am playing a file which has (digital) sound. My television is connected to
the EM7095 using a DVI adapter plug, but I do not hear any sound. What is
causing this?
A: DVI only delivers image, not sound. If you are using a DVI adapter plug,
make sure you use the optical, coaxial or white and red composite cables
for sound.
Q: The manual mentions the EM7095’s ability to play media. What
formats and codec’s are supported by the EM7095?
A: The EM7095 supports the following:
Video formats: TS, TRP, VOB, AVI, MKV, MOV, MPG, DAT, DivX,
MJPEG.
Video codec’s: MPEG1, MPEG2, MPEG4, H.264, MOTION JPEG.
Audio format: DOLBY DIGITAL, DTS STEREO (Downmix), AAC, MP3,
WMA.
Photo formats: JPG, JPEG, BMP, PNG.
Q: What file systems does the EM7095 support?
A: The EM7095 can read from FAT32, NTFS and EXT2/3 file systems.
To Next Page
Loading...
