9 |
NEDERLANDS
television and radio broadcastings.
6. Once the EM7095 has finished searching, the ‘Installation Guide’ appears.
7. Press the ‘Exit’ button.
7.2 Editing channels
It is also possible to edit the found channels, move them to another position on the list
and change the name of the channels.
1. Go to the ‘Program’ icon.
2. Select ‘Program Edit’ and press the ‘OK’ button.
3. Select a channel. If you want to place a channel on top of the list, press the red
‘Move’ button and browse to the top of the list.
4. Press the red ‘Move’ button again. The selected channel has now been placed
on top of the list.
5. If you want to ‘lock’ a channel, then press the yellow button on the remote. A lock
icon appears behind the name of the channel. Watching a ‘locked’ channel
requires a password to be watched. The default password is ‘000000’.
Hint: Press the blue button on the remote to delete a channel.
7.3 Using the received channels
Now the channels have been received and are stored, you are able to view the
television channels and you can listen to the received radio channels.
1. Press the ‘Exit’ button a few times. The EM7095 will exit the menu and you will
see a television channel.
2. Use the alphanumeric buttons to select another channel, you can also use the
arrow keys to select another television channel.
3. If you want to listen to a radio channel, press the ‘TV/RADIO’ button on the
remote control to switch to the radio mode. Use the arrow keys to select another
radio station.
8.0 Using the record function
You can also use the EM7095 as a recording device, meaning you can record TV
channels. Use the following steps to record television channels.
1. Go to the ‘USB’ icon.
2. Use the arrow keys to select ‘PVR Configure’ and press the ‘OK’ button.
3. Select ‘Record Device’ and press the right arrow key. The EM7095 will search for
connected USB drives.
4. If found, the USB drive will be mentioned behind ‘Disk’. The used file system
(media type), disk space and the amount of free disk space will also be