Eminent EM7095 - Language Settings; Screen Settings; Audio Settings

7 | NEDERLANDS
connection, you can setup the EM7095’s resolution. Also, it is very convenient to use
this device using your own native language. During the next chapter we will explain
the main settings of the EM7095.
As soon as the EM7095 starts for the first time, the devices starts searching for
available broadcastings. Press the ‘Exit’ button on the remote to skip this part and
directly enter the main menu of the EM7095.
6.1 Language settings
1. Go to the ‘Options’ icon.
2. Use the arrow keys to select ‘OSD Language’.
3. Select the desired language and press the ‘OK’ button, then press the ‘Return’
button.
4. Select ‘Subtitle Language’.
5. Select the language of the subtitles. Press the ‘OK’ button, then press the
‘Return’ button.
6.2 Screen settings
1. Go to the ‘Picture’ icon and press the ‘OK’ button.
2. Use the arrow keys to select ‘Aspect ratio’.
3. Select the desired aspect ratio: Select 16:9 if you are using a widescreen
television, select 4:3 if you are using an older, non widescreen television. Press
the ‘OK’ button, then press the ‘Return’ button.
4. Go to ‘Resolution’. Select the desired resolution: Select 720p if you are using a
HD Ready television. Press the ‘OK’ button, then press the ‘Return’ button.
5. Go to ‘TV Format’. Select ‘PAL’ if you are located in Europe. Select ‘NTFS’ if you
are located in North-America. Press the ‘OK’ button, then press the ‘Return’
button.
6. Go to ‘Video Output’. Select ‘RGB’ is the EM7095 is connected to your television
using HDMI. Use CVBS if the EM7095 is connected to your television using
composite.
6.3 Audio settings
1. Go to the ‘Option’ icon and press the ‘OK’ button.
2. Select ‘Audio Language’.
3. Select the language of the audio streams and press the ‘OK’ button. Then press
the ‘Return’ button.
4. Select ‘Digital Audio’.
5. Select the desired sound setting. Select ‘RAW’ if the EM7095 is connected to a
digital receiver. Select ‘PCM’ if you have connected the EM7095 using HDMI to
your television. Press the ‘OK’ button, then press the ‘return’ button.