composite
If your television is not equipped with an HDMI connection, you can use the composite
connection on the EM7095. Connect the yellow plug to the yellow cinch connection on
the EM7095.
Now you can connect the yellow plug on the other side of the cable to the yellow cinch
connection on your television.
5.0 Audio Connections
The EM7095 DVB-T host has several connections for audio. During the following
chapter we will explain these connections and we will explain how to connect these
audio connections.
5.1 HDMI connection on the television
If your television has HDMI audio support, you can make use of the HDMI cable order
to receive both image and digital sound on your television, in stereo only.
5.2 Cinch cables
You can also connect the white and red cinch cables to your receiver in order to
create a ’2.0’ stereo effect.
5.3 HDMI connection (digital receiver)
If you have a digital HDMI receiver, then you can enjoy the true digital sound by
connecting the EM7095 over HDMI 1.3 to a HDMI input on your digital receiver.
5.4 Coaxial (digital receiver)
If you have a digital receiver with a Coaxial connection, then you can enjoy the
EM7095’s digital sound during movie and music play. Simply connect the coaxial
cable to the coaxial connection on your digital receiver and EM7095 DVB-T host.
5.5 Connecting the Antenna cable
The EM7095 can receive so called ‘Free-to-air’ broadcastings, meaning the EM7095
can receive both television and radio broadcastings if available. Simply connect the
antenna cable of your indoor or outdoor antenna to the ‘Antenna in’ connection of the
EM7095 and start enjoying the EM7095.
6.0 Setting up the EM7095 DVB-T host
Before using the EM7095, you have to setup the EM7095 DVB-T host. There are
many settings which you can change. Since the EM7095 is equipped with a HDMI 1.3
To Next Page
Loading...
