EMKO ESM-3711-H User Manual

ESM-
77x35
DIN
Size
Heating
Controller
371
1-H
ESM- 77 x 35 DIN3711-H Size
Digital, ON / OFF Temperature Controller
Instruction Manual. ENG ESM-3711-H 02 V01 07/08
- 3 Digits display
- PTC Input or,
J type Thermocouple Input or,
K type Thermocouple Input or,
2-Wire PT 100 Input or,
2-Wire PT 1000 Input (It must be determined in order)
- ON/OFF temperature control
- Adjustable temperature offset
- Set value low limit and set value high limit boundaries
- Relay or SSR driver output
- Adjustable cooking time from front panel
- Temperature control with manual heating function
- Alarm parameters
- Adjustable internal buzzer according to cooking time , probe
defect and alarm status
- Button protection
- Password protection for programming section
- Digital Input (Cooking time start/stop input)
- Temperature control according to the cooking time (Timer)
- User can select to start cooking time (Timer) when temperature
reaches to the set value
Internal Buzzer

EMKO ESM-3711-H Specifications

General

Model	ESM-3711-H
Type	Temperature Controller
Display Type	LED
Control Algorithm	PID
Protection Class	IP65
Input Type	Thermocouple, RTD
Output Type	Relay
Power Supply	100-240V AC
Control Mode	On/Off

Summary

Instruction Manual Overview

Installation Section Overview

Explains physical dimensions, panel mounting, and electrical wiring.

Operation and Parameters Overview

Explains user interface, parameter access, and descriptions.

Preface and Product Information

General Specifications

Details technical specifications like power supply, sensor inputs, and output types.

Product Ordering and Support

Ordering Information

Provides codes for configuring and ordering the device.

Warranty and Maintenance

Outlines warranty period, conditions, and recommended maintenance procedures.

Installation Procedures

Device Description and Dimensions

Provides an overview of the device, front panel layout, and physical dimensions.

Panel Cut-Out Specifications

Specifies the required dimensions for panel mounting.

Panel Mounting and Fixing

Details environmental ratings and panel mounting procedures.

Installation Fixings and Removal

Details how to use fixing clamps and remove the unit from the panel.

Electrical Wiring and Connections

Terminal Layout and Wiring Instructions

Explains the terminal layout and provides general wiring connection instructions.

Wiring Diagram and Device Label

Illustrates the complete electrical wiring diagram and shows device label examples.

Supply Voltage and Sensor Input

Details how to connect power supply voltage and temperature sensors.

Output Connection Types

Wiring diagrams for relay and SSR driver output connections.

Front Panel Operation and Programming

Software Revision Display

How to view the software revision upon power-up.

Set Value and Cooking Time Adjustment

Step-by-step guide to modify and save set temperature and cooking time values.

Programming Mode Parameter List

Lists and explains various programming mode parameters.

Cooking Time ON/OFF Operations

Details ON/OFF operation for cooking time using buttons or inputs.

Operation Graphics and Diagrams

Illustrates operational sequences and parameter effects through graphics.

Programming Mode Access Diagram

Visual guide to navigate and access programming mode parameters.

Entering Programming Mode and Parameter Changes

Detailed steps for entering programming mode and changing parameters.

Troubleshooting and Specifications

Failure Messages

Describes common failure messages displayed by the controller.

Device Specifications

Provides a comprehensive list of the device's technical specifications and features.