EMKO ESM-9910 User Manual

ESM-9910 96 x 96 1/4 DIN Temperature Controller
- 3 D
- Selectable heating and cooling function
- Operating type selection with hysteresis
- Adjustment of temperature offset value
- Minimum pulling time adjustment for control outputs
- Password protection for programming mode
igits display
- NTC Input or,
PTC Input or,
J type thermocouple or,
K type thermocouple or,
PT-100 2-wire or 3-wire temperature input
( It must be determined in order )
- ON/OFF control form
ESM-9910 96 x 96 1/4 DIN
Digital, On/Off Temperature Controller
Instruction Manual. ENG ESM-9910 02 V07 07/14

EMKO ESM-9910 Specifications

General

Brand	EMKO
Model	ESM-9910
Category	Temperature Controller
Language	English

Summary

EU Declaration of Conformity

1. Preface

1.1 General Specifications

Details application fields and general technical specifications for the ESM-9910 controller.

1.2 Ordering Information

Provides codes and options for configuring and ordering ESM-9910 temperature controllers.

1.3 Warranty

Outlines EMKO Elektronik's warranty terms for the delivered equipment.

1.4 Maintenance

Provides guidelines for authorized personnel regarding device repairs and cleaning.

2. Installation

2.1 General Description

Overview of the ESM-9910 controller, including front panel and general description.

2.2 Front View and Dimensions of ESM-9910 Temperature Controller with One Relay

Illustrates the front view and provides physical dimensions for the ESM-9910 with one relay.

2.3 Front View and Dimensions of ESM-9910 Temperature Controller with Two Relays

Illustrates the front view and provides physical dimensions for the ESM-9910 with two relays.

2.4 Panel Cut-Out

Specifies the required dimensions for panel cut-out to mount the ESM-9910 controller.

2.5 Environmental Ratings

Details operating conditions, humidity, altitude, and forbidden atmospheres for the device.

2.6 Panel Mounting

Explains the procedure and precautions for mounting the ESM-9910 controller into a panel.

2.7 Installation Fixing Clamp

Explains the use of fixing clamps and the procedure for mounting the unit securely.

2.8 Removing from the Panel

Provides step-by-step instructions for safely removing the unit from the panel.

3. Electrical Wirings

3.1 Terminal Layout and Connection Instructions

Shows terminal layout and provides instructions for making electrical connections to the device.

3.2 Electrical Wiring Diagram

Presents the electrical wiring diagram for connecting the ESM-9910 temperature controller.

3.3 Labels for ESM-9910 Temperature Controller with One Relay

Displays rear label appearances for ESM-9910 models with one relay, showing input/output configurations.

3.4 Labels for ESM-9910 Temperature Controller with Two Relays

Displays rear label appearances for ESM-9910 models with two relays, showing input/output configurations.

3.5 Supply Voltage Input Connection of the Device

Details how to properly connect the supply voltage to the ESM-9910 temperature controller.

3.6 Temperature Input Connection

Explains how to connect various temperature sensors like TC, RTD, PTC, and NTC to the device.

3.7 Galvanic Isolation Test Values of ESM-9910 Temperature Controller

Lists the galvanic isolation test values for different ESM-9910 configurations.

3.8 Output-1 Connection

Explains how to connect the Output-1, either as a relay or SSR driver.

3.9 Output-2 Connections

Explains how to connect the Output-2, either as a relay or SSR driver.

4. Front Panel Definition and Accessing to the Menus

4.1 Front Panel Definition for ESM-9910 with One Relay

Details the front panel layout and controls for the ESM-9910 with one relay.

4.2 Front Panel Definition for ESM-9910 with Two Relays

Details the front panel layout and controls for the ESM-9910 with two relays.

4.3 Observation of ESM-9910 Temperature Controller Software Revision

Explains how to view the software revision number displayed on the device.

4.4 Changing and Saving Set Values

Guides on how to change and save set values for the temperature controller.

4.5 Entering to Programming Mode, Changing and Saving Parameters

Explains how to enter programming mode, change, and save parameters with password protection.

5. Parameters

5.1 Set Parameters

Defines SET1 and SET2 parameters for controlling output relays based on set values.

5.2 Program Parameters

Details program parameters like Hysteresis, Operation Type, Process Offset, and Minimum Pulling Time.

6. Failure Messages in ESM-9910 Temperature Controllers

7. Control Algorithm

7.1 ON/OFF Control

Explains the ON/OFF control algorithm, including hysteresis for temperature regulation.

8. Specifications

9. Other Informations