EMKO ESM-3712-HCN User Manual

ENGLISH
ESM-3712-HCN 77x35 DIN Size Temperature Controller
Instruction Manual. ENG ESM-3712-HCN 01 V02 02/14
- 4 Digits Display
- NTC Input or
PTC Input or
(Must be determined in order.)
-
- Operation selection of compressor operates continuously,
stops or operates periodically in case of sensor defect
- Compressor protection delays
- Alarm parameters
-
- Password protection for programming section
- Installing parameters using Prokey
- Remote access, data collecting and controlling with Modbus RTU
- Having CE mark according to European Norms
-
J Type thermocouple Input or,
K Type thermocouple Input or,
2-Wire PT-100 Input or,
2-Wire PT-1000 Input
2 output for compressor and alarm controls
- Adjustable Alarm Set Value from front panel
Adjustable internal buzzer according to Sensor prob defect and
Alarm status
ON/OFF temperature control
Selectable heating or cooling function
- Selection of operation with hysteresis
- Adjustable temperature offset
-
- Process Set value and Alarm Set value low limit and set value
high limit boundaries
ESM- 77 x 35 DIN Size3712-HCN
Digital ON / OFF Temperature
Controller (ALARM+SET)

EMKO ESM-3712-HCN Specifications

General

Brand	EMKO
Model	ESM-3712-HCN
Category	Temperature Controller
Language	English

Summary

Installation, Warranty, and Maintenance

Installation Procedures

Provides instructions and safety precautions for the proper installation of the device.

Device Mounting and Prokey Usage

Panel Mounting Instructions

Step-by-step guide for securely mounting the device into a control panel.

Using the Prokey Tool

Electrical Wiring and Connections

Electrical Wiring Diagram

A schematic illustrating the internal and external electrical connections of the device.

Supply Voltage Input Connection

Detailed instructions for safely connecting the power supply to the controller.

Device Label and Connection Diagram

Front Panel Elements and Navigation

Button Functions

Explanation of the operation and purpose of each button on the controller's front panel.

Operation and Parameter Configuration

Changing and Saving Temperature Set Value

Changing and Saving Alarm Set Value

Programming Mode Parameter List

Detailed list and explanation of configurable parameters available in the programming mode.

Modbus Status Parameters

Alarm Output and Type Graphics

Control Mode Operation Graphics

Failure Messages

Entering Programming Mode

Specifications