EMKO ESM-4420 User Manual

ESM- 48x48 DIN 1/16
T
emperature Controller4420
ESM-4420 48 x 48 DIN 1/16
Temperature Controller with Universal Input
- 4 digits process(PV) and 4 digits process set value
- Universal process input (TC, RTD )
- Adaptation of PID Coefficients to the system with Self-Tune
operation (Step Response Tuning)
- Programmable Heating or Cooling Functions for Control Output
- Alarm Functions for Alarm Output
(SV) display
- Configurable ON/OFF, P, PI, PD and PID control forms
Instruction Manual. ENG ESM-4420 02 V03 04/08

EMKO ESM-4420 Specifications

General

Dimensions	48 x 48 x 100 mm
Input Type	Thermocouple
Output	Relay
Control Output	Relay
Supply Voltage	230V AC
Control Mode	ON/OFF, PID
Display	4 Digit, 7 Segment LED
Power Supply	230V AC
Operating Temperature	0 to 50°C
Mounting	Panel mounting

Summary

Installation

Panel Cut-Out

Electrical Wirings

Electrical Wiring Diagram

Visual guide showing the complete wiring connections for the device.

Device Label and Connections

Supply Voltage Input Connection

Detailed instructions for connecting the device's power supply.

Process Input Connection

Output Connection Forms

Process Output (Relay) Connection

Process Output (SSR Driver) Connection

Alarm Output (Relay) Connection

Front Panel Definition and Accessing to the Menus

Front Panel Definition

Value Adjustment Procedures

Adjustment of Process SET Value

Step-by-step guide to changing the process set value.

Adjustment of Alarm SET Value

Step-by-step guide to changing the alarm set value.

Parameters

Parameter List

Detailed listing of all parameters with their default values and descriptions.

Easy Access Diagram of Parameters

Entering to the Programming Section and Process Menu

Control Menu

Alarm Menu

Protection Menu

General Information

Tune Operation

Explains the Self Tune (Step Response Tuning) method for PID parameter determination.

Alarm Types

Failure Messages

Specifications