Infrared Remote Control (Original Transport Remote)
e remote control provides combined functions for both the DA2i (Green), associated
EMM Labs TX2 transport (Red) and some EMM Labs pre-amp functions (Orange).
DAC : Toggles the preset display brightness settings in DA2i
Input Buttons :
• EMM : Selects the EMM Optilink input
• PC : Selects the USB Audio input
• AES : Selects the AES/EBU input, balanced digital XLR
• COAX : Selects SPDIF input, unbalanced COAX/RCA
• TOS : Selects SPDIF input, TOSLINK optical
• PDAI : Selects network input, RJ45
Polarity : Toggles the analog output polarity. is function is performed in the
digital domain. When engaged the display will show “POL INV” and
it will be highlighted
Input : Switches through all the digital inputs
Mute : Mutes the DA2i analog outputs
Transport : EMM Labs TX2 transport functions (Red buttons)
Pre-amp : EMM Labs pre-amp functions (Orange buttons)
DAC
TRANSPORT
POLARITY
MUTE
VOLUME
© 2024 EMM Labs, All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
031
Infrared Remote Control
DA2i STEREO D/A CONVERTER OWNER’S MANUAL
To Next Page
Loading...