© 2024 EMM Labs, All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
032
Care & Maintenance
DA2i STEREO D/A CONVERTER OWNER’S MANUAL
Care & Maintenance
EMM Labs products require just basic routine maintenance and care to ensure optimal
performance:
• Before performing any maintenance please ensure to turn the product
OFF, and remove its power cable
• To remove dust from the exterior surface you can use a, low pressure blower,
or brush it with a dry clean lint free or micro ber cloth
• To remove nger prints. dirt or grease from the exterior surface you can use
a dry clean lint free or micro ber cloth
• In some cases it may be necessary to dampen the lint free or micro ber
cloth with some distilled water prior to gently cleaning ngerprints or dirt
from its surface
• DO NOT apply liquid directly to the surface, always apply indirectly using a
dampened lint free or micro ber cloth
• DO NOT USE abrasive pads, steel wool, metal polish or other such abrasive
means to clean the surface, of any EMM Labs products or its connectors
• DO NOT USE any commercial cleaners, benzene, acetone or chemicals to
clean the surface, of any EMM Labs products or its connectors
To Next Page
Loading...