Maintenance ----Basic
1. There are two fuses in the bike. A 30Amp located in the battery box. The second fuse
is a sealed fuse on the controller.
2. Clean Chain Regularly.
3. Ensure Tires are inflated to 35 PSI.
4. Adjust Brake tension via adjusting screws located at Brake lever or on Brake control
lever.
5. Ensure regular servicing according to the schedule.
6. Do not attempt to change any electronic components except changing light bulbs.
7. DO not attempt to modify, open or perform maintenance on the Hub Motor.
8. Any attempt to modify or adjustment of electrical components will void the warranty.
Maintenance ----Schedule