Other Helpful Instructions
Pedals
1. Use a pedal wrench of 16mm spanner to tighten pedals.
2. Check and tighten pedal crank bolts with 14mm socket.
3.
Tires
1. Inflate tire using a pump to 30-35psi. Remember lower tire pressures will negatively impact
performance by causing too much resistance.
2.
Chain
1. Give the train a light drop of bicycle chain oil or sewing oil .Do not use RP7 type lubricants.
2.
Mirrors
1. Insert rear mirrors into slot ensuring a match for left and right Etc.
2. Twist until tight with Allen key. Don’t over tighten. see figure 1-12:
figure 1-12
Battery
1. Insert battery case and plug in the opposite way to the way you removed it.
2. The battery will have enough charge for a short ride/use for your first ride.
3. Charge the battery overnight.
4.
To Next Page
Loading...
